
The Heavyweight Organizer
Borroughs high density drawers provide a powerful storage solution with a capacity up to 400 lbs. per drawer. Partition and divider combinations allow you to design a system with pre-configured or customized layouts to improve space efficiency as well as organizational productivity of heavy, hard to store or smaller items. drawers are designed to protect inventory with a cushion impact closing mechanism and a closing action that won’t allow drawers to drift open. optional label holders provide easy and fast compartment identification to improve retrieval time and efficiency. Best of all, Borroughs high density drawers are designed to work easily and seamlessly with your Box Edge plus® steel storage systems.
Borroughs HD Drawer Sizes
Drawers have 5 different heights: 3″, 4-1/2″, 6″, 9″ and 12″. Drawers can be arranged and rearranged to keep your storage system efficient as your operation grows and changes. They can be installed in any combination as long as the total height of the drawer fronts does not exceed the height of the mounting uprights.
Features
- Drawers fully extend to view and access entire contents.
- Ball bearing slide suspension for smooth operation.
- Soft cushion impact when closing and opening drawer.
- Each drawer will support up to 400 pounds of an evenly distributed load.
- Partitions and dividers can be added for custom configuration.
- All hardware and easy-to-follow instructions are provided for fast installation.
- Drawer fronts are flush with posts for a custom look.
Components and Accessories
Partitions

Dividers

Slotted steel partitions create major drawer interior storage spaces. Partitions slide into slots on drawer walls to span the full width or depth of drawers–and, allow the addition of dividers to further subdivide the drawer’s interior. Partitions are available in 18″ and 24″ depths; 36″ and 48″ widths and 3″, 4-1/2″ and 6″ heights. All partitions are painted #161 Mist gray.
Galvanized steel dividers subdivide the storage spaces between partitions or partitions and drawer walls. Dividers simply drop into slots in partitions and drawer walls making storage space adjustments quick and easy. Slots are manufactured in partitions and drawer walls on 1″ nominal centers. Divider widths are measured by the number of drawer wall slots the divider spans (i.e. a 3s divider will span 3 slots). Dividers are available in heights to match partitions (3″,4-1/2″ and 6″) and in eleven widths (3 slots through 13 slots). The 36″ wide drawer has 31 slots allowing for up to ten 3s storage spaces. The 48″ wide drawer has 43 slots, allowing for up to fourteen 3s storage spaces.
Ergonomical
Full-width aluminum handle features integral label holder, paper insert, non-reflective mylar cover and plastic end cap.
Accessible
400 lb capacity slides offer a smooth suspension with full drawer extension.
Flexibile
Mounting upright sets are available in four heights: 18″, 24″, 36″ and 48″. They attach easily to angled or beaded shelving posts.
Organized
Optional snap-on gray plastic label holders are available for additional parts identification within drawer compartments.
Preconfigured Drawers
Borroughs offers a large number of standard preconfigured drawer interiors frequently ordered for small parts storage–and, for simplicity, these Borroughs’ drawers and interiors can be ordered as a complete, outfitted assembly using only one part number. This provides the drawer, including the slide and handle/label holder, factory installed partitions with essential dividers packaged in one carton. this makes ordering quick and easy…and saves installation time, too!
- Drawer interiors are painted #161 Mist Gray
- Drawers include full-width aluminum handle/label holder, end caps, paper label and clear plastic label cover
- Drawer dividers are galvanized steel
- Drawer partitions are painted #161 Mist Gray and installed in drawer
- Drawer dividers are taped together and packed in drawer
- Drawer slides are packed separately